Is MERV 13 Better Than MERV 11?

Is higher or lower Merv better?

The MERV air filter efficiency rating system was developed by the ASHRAE, the American Society of Heating, Refrigerating, and Air-Conditioning Engineers.

Generally, the higher the MERV, the better the filter will perform at removing smaller particle sizes.

MERV 1 through 4 are designed to remove large particles..

What MERV rating is best for home use?

Using an air filter with a MERV rating of about 5 to 8 is appropriate for most residential homes. MERV 5 – MERV 8 filters provide good filtration and will remove most pollen, mold spores, and dust mites.

What MERV rating is HEPA?

High-Efficiency Particulate Air (HEPA) filters are not MERV-rated, but a HEPA filter is typically considered as MERV 17 to 20, which is the highest group in MERV ratings. True HEPA filters have at least 99.97% efficiency in trapping 0.3-micron particles.

Are MERV 13 filters bad for HVAC?

MERV 13 pleated filters are also constructed with synthetic media. Excellent filtration however, not suitable for most hvac systems due to air flow resistance. Check with your furnace manufacturer to ensure that your system is designed for this type of filter.

What MERV rating is filtrete 1500?

3M Filtrete 1″ Air Filters Comparison Chart:Basic DustUltra AllergenAvailable in:9 sizes30 sizes* MPR Rating:3001500MERV Rating:512** Efficiency:34%90%5 more rows

Is MERV 8 too restrictive?

If your unit is older and/or very sensitive with airflow, use a filter that ranks from MERV 1 up to possibly MERV 6. If you want your air to at least be cleaned and handle dust, mold, pollen, and bacteria, then a MERV 8 will do the job.

What is the lowest MERV rating?

MERV 6MERV 6 is the lowest MERV rating offered by AirFilters.com. Though not recommended for allergy and asthma sufferers, filters with a MERV 6 rating are 8 times more efficient than the regular cheap fiberglass filters.

Does MERV 11 restrict airflow?

Be aware, too, that some retailers also use their own rating system instead of MERV. A decade ago, it used to be that if you had an HVAC system that used panel filters rated 6 through 9 MERV, putting in a MERV 11 or higher filter would restrict airflow (known as filter pressure drop).

Are MERV 13 filters worth it?

In some cases, using an air filter that is too restrictive for your system may cause low air flow problems as well. MERV 13 is the highest MERV value safe for residential furnaces; the higher ratings are used primarily in commercial units.

How good is MERV 11 filter?

Most Common Filter TypesRatingParticle Size RemovalDust-Spot Efficiency PercentMERV 9-40 – 45%MERV 10-50 – 55%MERV 11-60 – 65%MERV 12-70 – 75%

How often should you change a MERV 13 filter?

every 30 daysIf you want good indoor air quality (IAQ), you need better filtration and that means a MERV-13 filter. But high-MERV filters also happen to be more expensive so changing them every 30 days is not the so good for your pocketbook. The good news with high-MERV filters, though, is that they usually hold more dirt.

Is MERV 13 too high?

Filters within a MERV rating of 17-20 are almost never necessary in a residential home. A MERV rating of 13-16 is considered hospital level air quality, so it is unlikely your home needs any more than that.

Can my furnace handle MERV 11?

Higher rated filters allow less air to flow through though and can force your furnace to work harder and possibly malfunction. A MERV rating between eight and 11 is adequate for most homes. To be safe, you should check if your furnace manufacturer has a maximum MERV rating your model of furnace can use.

Is MERV 13 a HEPA?

MERV 13-16: Highest-quality non-HEPA filter, removing particles as small as 0.3-microns. MERV 17-20: True HEPA filters remove 99.97%+ of airborne particles 0.3-micron and larger.

What MERV rating is filtrete?

The Filtrete Advanced Allergen , Filtrete™ Ultra Allergen , Filtrete Micro Allergen , and Filtrete Dust & Pollen are rated as MERV 12, MERV 11, MERV 11 and, MERV 8, respectively. 3M highlights the portion of the ASHRAE 52.2 test that focuses on sub-micron particles with its own performance rating.

What MERV rating is best for allergies?

Ideally you want to choose a MERV rating of 10 or higher, which are most effective at blocking the particles that cause allergy symptoms.

Is MERV 8 good enough?

MERV 5–8 (good): These filters are better at catching small particles (3–10 microns) like mold spores, hair spray, dust mites and animal dander. MERV 9–12 (better): The best option for residential use. … Particles this small include bacteria, tobacco smoke and even the contaminants in sneezes.

How often should you change a MERV 11 filter?

every 6 monthsThe MERV rating also determines generally how often to change your furnace filter. MERV 8 filters should be changed every 3-4 months, MERV 10 & 11 filters every 6 months and MERV 16 filters every year.